Inventory Unit Detail

  1. Home
  2. Inventory Unit Detail

Honda Marine 25DK3LHGC

Sold

Sold

Overview

New/Used New
Availability Sold
LocationLabwest Powersports
Stock # 25DK3LHGC
VIN BATJ1501670
Condition Excellent

Product Features

Dealer Notes
PLUS TAX

Description

Three cylinder, 20" long shaft, electric start, tiller steering, gas-assist tilt.



Perfect for 14-16 ft. fishing boats, pontoon boats or small runabouts, the BF25 delivers big power and torque, thanks to its whopping 552 cc displacement. It has an ultra-smooth 3-cylinder design, the convenience and precision of up front tiller controls, a Fresh Water Flushport and Gas-assist Tilt.

Key Features
  • Four-Stroke Engine Design: World-renowned Honda quality, proven reliability with no oil mixing.
  • Over-Rev Protection: Standard rev-limiter protects the engine from severe damage caused by over-revving.
  • Over-Rev and Overheat Warning Systems: Standard over-rev and overheat warning systems offer peace of mind and protect your investment.
  • Fresh Water FlusHPort: Allows easy hook-up to fresh water supply to flush debris and salt water out of the engine, extending the life of the outboard (optional Flush Kit required).
  • Shallow-Water Drive: Allows the engine to run in a tilted position at low-throttle settings – greatly reducing the risk of engine damage while navigating in shallow water.
  • Sacrificial Anodes: The BF25 has 1 internal and 2 external sacrificial anodes to protect metal components from corrosion.
  • Three-Year Warranty: The best outboards in the industry are backed by the best warranty in the business, 3 years parts and labour.
  • Forward-Mounted Shift Lever: Allows for easier shifting, especially when docking or in tight access areas.
  • Regulated, High-Output Charging System: A 4-amp charging system is standard on manual-start models, and a 10-amp on the electric-start models. Each system is equipped with a solid-state regulator/rectifier for easy hook-up.
  • Emergency Stop Switch/Safety Lanyard: The boat operator clips the lanyard to his or her wrist, which will activate the safety stop switch if the operator leaves the helm.
  • Standard Fuel Tank, Hose and Propeller: A 25-litre fuel tank, fuel hose and aluminum propeller are included as standard equipment.
Engine
  • Type: 4-Stroke SOHC; 3 Cylinders, 6 Valves
  • Displacement: 33.7 cubic in. / 552 cc
  • Bore & Stroke: 24.0 x 2.48 in. (61 mm x 63 mm)
  • Full Throttle RPM Range: 5,000-6,000 RPM
  • Propshaft Rated Horsepower: 25 HP @ 5,500 RPM
  • Cooling System: Water Cooled
  • Fuel Delivery: 3 Carburetor
  • Recommended Fuel: Unleaded Gas. (Min. Pump Octane 86)
  • Ignition System: Capacitor Discharge; Digital CDI
  • Starting System: Electric
  • Exhaust: Through Prop Hub
  • Lubrication: Forced Lubrication
  • Recommended Oil: SAE 5W30 API service classification SJ or later
  • Oil Capacity: 1.80 Imp. qt (1.70 L) with oil filter repl.
  • Trim Range: -4° to +12°
  • Tilt Range: -4° to 64°
Drive
  • Gear Ratio: 2.08:1
  • Gear Shift: F-N-R
Equipment
  • Alternator: 10 amp / 126 watts
  • Gas Assisted Tilt: Standard
  • Oil Pressure Alert: Standard
  • Over Rev-Limiter: Standard
  • Temperature Alert: Standard
Dimensions
  • Overall Width: 14.8 in. / 375 mm
  • Transom Height: 21.7 in. / 552 mm
Propeller
  • Propeller Type: 3-Blade (Aluminum)
  • Propeller Diameter x Pitch: 9-1/4 x 12 in. / 235 mm x 305 mm
Dry Weight
  • LHGC-Type: 183 lbs. / 83.0 kg (With propeller mounted)
Warranty
  • Standard Warranty: As a testament to their quality and reliability, all Honda marine engines come with a warranty of 36 months for non-commercial use and 12 months for commercial use.
  • Honda Plus Extended Warranty: Honda Plus extended warranty is now available for your marine engine. You can prolong your worry-free pleasure on specified parts and components even further. For more details, please view the Warranty section.
NOTES:
Optional built-in Pitot tube kit may be required.

The steering angle can be set at 30° when two outboard motors are installed at an interval of 558 mm (ICOMIA standard recommendation). It can be set at 50°, too, depending on the installation interval. Do not set the steering angle at 50° on a high speed boat, as it can impair the steering stability.
When the boat is equipped with a hydraulic steering type of the outboard motor, steering angle can be set at 30°; It cannot be set at 50°. However, note that the steering angle can be set at 50° by using a connecting plate, depending on the type of hydraulic steering.

Honda outboard motors are power rated in accordance with NMMA procedures using the ICOMIA standard 28/23.

Engine

Engine Type 4-Stroke SOHC; 3 Cylinders, 6 Valves
Bore x Stroke 24.0 in. x 2.48 in. (61 mm x 63 mm)
Displacement 33.7 cu. in. (552 cc)
Starting Electric

Dimensions

Shaft Length 20 in.
Weight 183 lb. (83.0 kg) w/propeller mounted

General

Trim Method -4 deg. to +12 deg.
Propshaft Horsepower 25 HP @ 5500 rpm
Full Throttle Operating Range 5000-6000 rpm
Gear Ratio / Shift 2.08:1 / F-N-R
Fuel Induction 3 Carburetor
Alternator 10 amp (126 W)
Cooling Water Cooled
Steering Tiller
Warranty Standard non-commercial: 36 months; Standard commercial: 12 months; Optional: Honda Plus extended warranty

Shopping Tools